Strength is an attribute that cannot be significantly improved through the practice of participating in Combat Sports, therefore it makes strength training a wise investment, particularly if you want to win. The purpose of increasing strength is to develop physical capacities necessary to handle the unpredictable nature and stressors of the sport. Athletes need to be prepared for all aspects of physical combat including punching, kicking, takedowns, takedown defense, arm bars, guillotine, grappling, and clinching, not to mention proper conditioning and muscle endurance. A simpler way to say it would be, to achieve victory an athlete needs to be faster, more explosive and last longer than their opponent. Also, let me make it clear before I go any further, strength does not replace technique — wrestlers should prioritize wrestling, just as martial artists should ultimately work to perfect their discipline — but improving strength will transfer to better technical performance (e.g., technique) on the mat or in the cage.
Written on January 31, 2008, by Eric Cressey
Even the best athletes are limited by their most significant weaknesses. For some athletes, weaknesses may be mental barriers along the lines of fear of playing in front of large crowds, or getting too fired up before a big contest. Others may find that the chink in their armor rests with some sport-specific technique, such as shooting free throws. While these two realms can best be handled by the athletes’ head coaches and are therefore largely outside of the control of a strength and conditioning coach, there are several categories of weak links over which a strength and conditioning specialist can have profound impacts. These impacts can favorably influence athletes’ performance while reducing the risk of injury. With that in mind, what follows is far from an exhaustive list of the weaknesses that strength and conditioning professionals may observe, especially given the wide variety of sports one encounters and the fact that the list does not delve into neural, hormonal, or metabolic factors. Nonetheless, in my experience, these are the ten most common biomechanical weak links in athletes:
1. Poor Frontal Plane Stability at the Hips: Frontal plane stability in the lower body is dependent on the interaction of several muscle groups, most notably the three gluteals, tensor fascia latae (TFL), adductors, and quadratus lumborum (QL). This weakness is particularly evident when an athlete performs a single-leg excursion and the knee falls excessively inward or (less commonly) outward. Generally speaking, weakness of the hip abductors – most notably the gluteus medius and minimus – is the primary culprit when it comes to the knee falling medially, as the adductors, QL, and TFL tend to be overactive. However, lateral deviation of the femur and knee is quite common in skating athletes, as they tend to be very abductor dominant and more susceptible to adductor strains as a result. In both cases, closed-chain exercises to stress the hip abductors or adductors are warranted; in other words, keep your athletes off those sissy obstetrician machines, as they lead to a host of dysfunction that’s far worse that the weakness the athlete already demonstrates! For the abductors, I prefer mini-band sidesteps and body weight box squats with the mini-band wrapped around the knees. For the adductors, you’ll have a hard time topping lunges to different angles, sumo deadlifts, wide-stance pull-throughs, and Bulgarian squats.
2. Weak Posterior Chain: Big, fluffy bodybuilder quads might be all well and good if you’re into getting all oiled up and “competing” in posing trunks, but the fact of the matter is that the quadriceps take a back seat to the posterior chain (hip and lumbar extensors) when it comes to athletic performance. Compared to the quads, the glutes and hamstrings are more powerful muscles with a higher proportion of fast-twitch fibers. Nonetheless, I’m constantly amazed at how many coaches and athletes fail to tap into this strength and power potential; they seem perfectly content with just banging away with quad-dominant squats, all the while reinforcing muscular imbalances at both the knee and hip joints. The muscles of the posterior chain are not only capable of significantly improving an athlete’s performance, but also of decelerating knee and hip flexion. You mustn’t look any further than a coaches’ athletes’ history of hamstring and hip flexor strains, non-contact knee injuries, and chronic lower back pain to recognize that he probably doesn’t appreciate the value of posterior chain training. Or, he may appreciate it, but have no idea how to integrate it optimally. The best remedies for this problem are deadlift variations, Olympic lifts, good mornings, glute-ham raises, reverse hypers, back extensions, and hip-dominant lunges and step-ups. Some quad work is still important, as these muscles aren’t completely “all show and no go,” but considering most athletes are quad-dominant in the first place, you can usually devote at least 75% of your lower body training to the aforementioned exercises (including Olympic lifts and single-leg work, which have appreciable overlap).
Regarding the optimal integration of posterior chain work, I’m referring to the fact that many athletes have altered firing patterns within the posterior chain due to lower crossed syndrome. In this scenario, the hip flexors are overactive and therefore reciprocally inhibit the gluteus maximus. Without contribution of the gluteus maximus to hip extension, the hamstrings and lumbar erector spinae muscles must work overtime (synergistic dominance). There is marked anterior tilt of the pelvis and an accentuated lordotic curve at the lumbar spine. Moreover, the rectus abdominus is inhibited by the overactive erector spinae. With the gluteus maximus and rectus abdominus both at a mechanical disadvantage, one cannot optimally posteriorly tilt the pelvis (important to the completion of hip extension), so there is lumbar extension to compensate for a lack of complete hip extension. You can see this quite commonly in those who hit sticking points in their deadlifts at lockout and simply lean back to lock out the weight instead of pushing the hips forward simultaneously. Rather than firing in the order hams-glutes- contralateral erectors-ipsilateral erectors, athletes will simply jump right over the glutes in cases of lower crossed syndrome. Corrective strategies should focus on glute activation, rectus abdominus strengthening, and flexibility work for the hip flexors, hamstrings, and lumbar erector spinae.
3. Lack of Overall Core Development: If you think I’m referring to how many sit-ups an athlete can do, you should give up on the field of performance enhancement and take up Candyland. The “core” essentially consists of the interaction among all the muscles between your shoulders and your knees; if one muscle isn’t doing its job, force cannot be efficiently transferred from the lower to the upper body (and vice versa). In addition to “indirectly” hammering on the core musculature with the traditional compound, multi-joint lifts, it’s ideal to also include specific weighted movements for trunk rotation (e.g. Russian twists, cable woodchops, sledgehammer work), flexion (e.g. pulldown abs, Janda sit-ups, ab wheel/bar rollouts), lateral flexion (e.g. barbell and dumbbell side bends, overhead dumbbell side bends), stabilization (e.g. weighted prone and side bridges, heavy barbell walkouts), and hip flexion (e.g. hanging leg raises, dragon flags). Most athletes have deficiencies in strength and/or flexibility in one or more of these specific realms of core development; these deficiencies lead to compensation further up or down the kinetic chain, inefficient movement, and potentially injury.
4. Unilateral Discrepancies: These discrepancies are highly prevalent in sports where athletes are repetitively utilizing musculature on one side but not on the contralateral side; obvious examples include throwing and kicking sports, but you might even be surprised to find these issues in seemingly “symmetrical” sports such as swimming (breathing on one side only) and powerlifting (not varying the pronated/supinated positions when using an alternate grip on deadlifts). Obviously, excessive reliance on a single movement without any attention to the counter-movement is a significant predisposition to strength discrepancies and, in turn, injuries. While it’s not a great idea from an efficiency or motor learning standpoint to attempt to exactly oppose the movement in question (e.g. having a pitcher throw with his non-dominant arm), coaches can make specific programming adjustments based on their knowledge of sport-specific biomechanics. For instance, in the aforementioned baseball pitcher example, one would be wise to implement extra work for the non-throwing arm as well as additional volume on single-leg exercises where the regular plant-leg is the limb doing the excursion (i.e. right-handed pitchers who normally land on their left foot would be lunging onto their right foot). Obviously, these modifications are just the tip of the iceberg, but simply watching the motion and “thinking in reverse” with your programming can do wonders for athletes with unilateral discrepancies.
5. Weak Grip: – Grip strength encompasses pinch, crushing, and supportive grip and, to some extent, wrist strength; each sport will have its own unique gripping demands. It’s important to assess these needs before randomly prescribing grip-specific exercises, as there’s very little overlap among the three types of grip. For instance, as a powerlifter, I have significantly developed my crushing and supportive grip not only for deadlifts, but also for some favorable effects on my squat and bench press. Conversely, I rarely train my pinch grip, as it’s not all that important to the demands on my sport. A strong grip is the key to transferring power from the lower body, core, torso, and limbs to implements such as rackets and hockey sticks, as well as grappling maneuvers and holds in mixed martial arts. The beauty of grip training is that it allows you to improve performance while having a lot of fun; training the grip lends itself nicely to non-traditional, improvisational exercises. Score some raw materials from a Home Depot, construction site, junkyard, or quarry, and you’ve got dozens of exercises with hundreds of variations to improve the three realms of grip strength. Three outstanding resources for grip training information are Mastery of Hand Strength by John Brookfield, Grip Training for Strength and Power Sports by accomplished Strongman John Sullivan, and www.DieselCrew.com.
6. Weak Vastus Medialis Oblique (VMO): The VMO is important not only in contributing to knee extension (specifically, terminal knee extension), but also enhancing stability via its role in preventing excessive lateral tracking of the patella. The vast majority of patellar tracking problems are related to tight iliotibial bands and lateral retinaculum and a weak VMO. While considerable research has been devoted to finding a good “isolation” exercise for the VMO (at the expense of the overactive vastus lateralis), there has been little success on this front. However, anecdotally, many performance enhancement coaches have found that performing squats through a full range of motion will enhance knee stability, potentially through contributions from the VMO related to the position of greater knee flexion and increased involvement of the adductor magnus, a hip extensor (you can read a more detailed analysis from me here. Increased activation of the posterior chain may also be a contributing factor to this reduction in knee pain, as stronger hip musculature can take some of the load off of the knee stabilizers. As such, I make a point of including a significant amount of full range of motion squats and single-leg closed chain exercises (e.g. lunges, step-ups) year-round, and prioritize these movements even more in the early off-season for athletes (e.g. runners, hockey players) who do not get a large amount of knee-flexion in the closed-chain position in their regular sport participation.
7 & 8. Weak Rotator Cuff and/or Scapular Stabilizers: I group these two together simply because they are intimately related in terms of shoulder health and performance.
Although each of the four muscles of the rotator cuff contributes to humeral motion, their primary function is stabilization of the humeral head in the glenoid fossa of the scapula during this humeral motion. Ligaments provide the static restraints to excessive movement, while the rotator cuff provides the dynamic restraint. It’s important to note, however, that even if your rotator cuff is completely healthy and functioning optimally, you may experience scapular dyskinesis, shoulder, upper back, and neck problems because of inadequate strength and poor tonus of the muscles that stabilize the scapula. After all, how can the rotator cuff be effective at stabilizing the humeral head when its foundation (the scapula) isn’t stable itself? Therefore, if you’re looking to eliminate weak links at the shoulder girdle, your best bet is to perform both rotator cuff and scapular stabilizer specific work. In my experience, the ideal means of ensuring long-term rotator cuff health is to incorporate two external rotation movements per week to strengthen the infraspinatus and teres minor (and the posterior deltoid, another external rotator that isn’t a part of the rotator cuff). On one movement, the humerus should be abducted (e.g. elbow supported DB external rotations, Cuban presses) and on the other, the humerus should be adducted (e.g. low pulley external rotations, side-lying external rotations). Granted, these movements are quite basic, but they’ll do the job if injury prevention is all you seek. Then again, I like to integrate the movements into more complex schemes (some of which are based on PNF patterns) to keep things interesting and get a little more sport-specific by involving more of the kinetic chain (i.e. leg, hip, and trunk movement). On this front, reverse cable crossovers (single-arm, usually) and dumbbell swings are good choices. Lastly, for some individuals, direct internal rotation training for the subscapularis is warranted, as it’s a commonly injured muscle in bench press fanatics. Over time, the subscapularis will often become dormant – and therefore less effective as a stabilizer of the humeral head – due to all the abuse it takes.
For the scapular stabilizers, most individuals fall into the classic anteriorly tilted, winged scapulae posture (hunchback); this is commonly seen with the rounded shoulders that result from having tight internal rotators and weak external rotators. To correct the hunchback look, you need to do extra work for the scapular retractors and depressors; good choices include horizontal pulling variations (especially seated rows) and prone middle and lower trap raises. The serratus anterior is also a very important muscle in facilitating scapular posterior tilt, a must for healthy overhead humeral activity. Supine and standing single-arm dumbbell protractions are good bets for dynamically training this small yet important muscle; scap pushups, scap dips, and scap pullups in which the athlete is instructed to keep the scapulae tight to the rib cage are effective isometric challenges to the serratus anterior.
Concurrently, athletes with the classic postural problems should focus on loosening up the levator scapulae, upper traps, pecs, lats, and anterior delts. One must also consider if these postural distortions are compensatory for kinetic chain dysfunction at the lumbar spine, pelvis, or lower extremities. My colleague Mike Robertson and I have written extensively on this topic here. Keep in mind that all of this advice won’t make a bit of difference if you have terrible posture throughout the day, so pay as much attention to what you do outside the weight room as you do to what goes on inside it.
9. Weak Dorsiflexors: It’s extremely common for athletes to perform all their movements with externally rotated feet. This positioning is a means of compensating for a lack of dorsiflexion range of motion – usually due to tight plantarflexors – during closed-chain knee flexion movements. In addition to flexibility initiatives for the calves, one should incorporate specific work for the dorsiflexors; this work may include seated dumbbell dorsiflexions, DARD work, and single-leg standing barbell dorsiflexions. These exercises will improve dynamic postural stability at the ankle joint and reduce the risk of overuse conditions such as shin splints and plantar fasciitis.
10. Weak Neck Musculature: The neck is especially important in contact sports such as football and rugby, where neck strength in all planes is highly valuable in preventing injuries that may result from collisions and violent jerking of the neck. Neck harnesses, manual resistance, and even four-way neck machines are all good bets along these lines, as training the neck can be somewhat awkward. From a postural standpoint, specific work for the neck flexors is an effective means of correcting forward head posture when paired with stretches for the levator scapulae and upper traps as well as specific interventions to reduce postural abnormalities at the scapulae, humeri, and thoracic spine. In this regard, unweighted chin tucks for high reps throughout the day are all that one really needs. This is a small training price to pay when you consider that forward head posture has been linked with chronic headaches.
A good coach recognizes that although the goals of improving performance and reducing the risk of injury are always the same, there are always different means to these ends. In my experience, one or more of the aforementioned ten biomechanical weak links is present in almost all athletes you encounter. Identifying biomechanical weak links is an important prerequisite to choosing one’s means to these ends. This information warrants consideration alongside neural, hormonal, and metabolic factors as one designs a comprehensive program that is suited to each athlete’s unique needs.
What is the Science Behind Structural Balance Assessments?
The concept of structural balance is that a muscle’s ability to develop force is a function of the strength of the opposing muscle group and its stabilizers. Many training and sports-related injuries are often the result of muscular imbalances – strength discrepancies between opposing and synergist muscle groups or even between limbs. These structural imbalances are often caused by a combination of the repetitive motions involved in many sports and/or a lack of exercise variety in training.
A Structural Balance Analogy:
Another way to understand structural balance to imagine you are building a house. In construction, the term “footing” describes the concrete support that the foundation is built upon. The footing also spreads the weight of the structure evenly over a wider area. The walls of the house are then built on the foundation. However, if the footing is poorly developed it compromises the stability of the foundation, which in turn, compromises the structural integrity of the entire house.
Each of the body’s joints are similar to the above analogy in that the joint is the house and the muscles and tendons controlling that joint are the foundation and footing. Viewed as a whole, if the stability of one joint is compromised it will affect the structural integrity of the entire body.
This is the proverbial “only as strong as the weakest link” axiom.
A joint is controlled by two primary sets of opposing muscle groups; one set of muscles flexes the joint and the other extends it. Synergistic muscles help the respective primary muscle perform its action. While one primary muscle group and its synergists are moving the joint, the opposing muscle group and it synergists are stabilizing it from the opposite side.
There is an optimal balance of strength between these muscle groups that control a joint, but if the muscles on one side of the joint are disproportionately stronger than the muscles on the opposing side it creates joint instability, which increases the risk of injury to that joint.
The take away point here is balance is important and vital to injury prevention.
When the central nervous system senses joint instability, it reduces the ability to continue strengthening the muscles that are already too strong. This an effective safety mechanism the body utilizes to protect itself from injury.
However, this safety mechanism can be “overridden” by attempting to force the already too strong muscles to get even stronger — many injuries occur under these conditions. If you place more strain on the weakest link than it can tolerate, the chain breaks.
While unpredictable accidents will still occur, a thorough structural balance assessment can:
- Identify muscle weaknesses that leave a joint vulnerable to injury and compromise performance;
- Faulty movement patterns that cause misalignment of the body, which results in distorted movement;
- Muscle tightness that can result in strained or torn muscles, and;
- Provide the blueprint from which your initial training program is developed.
A structural balance assessment also provides a starting point for your training. Your initial training program is developed based on the results of your assessment and aimed at correcting your weaknesses, faulty movement patterns, and tight muscles through a progression of corrective and remedial exercises. This approach expedites your results and helps ensure continuous progress.
A thorough structural assessment should be the first step of anyone’s training program whether you are a competitive athlete from any level of competition, an avid CrossFitter, or someone who wants to look better and improve your health.